Aluminium alloy 2014

Aluminium alloy 2014 Chemical Physical Properties Data

Aluminium 2014 is stocked by Metal Ministry Inc. In Forms of Sheets, Plates, Coils, Bar Products, Pipes & Tubular Products, Flanges, Fittings & Custom Fabrication Parts as per Client Requirements all over the world. We Offer Cut to size to Full forms of Alloy 2014 Products.

Aluminium Alloy 2014 Chemical Composition:

%	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Bi	Ti+Zr	Others	Al
Minimum	0,50	-	3,90	0,40	0,20	-	-	-	-	-	-	-
Maximum	1,20	0,70	5,00	1,20	0,80	0,10	0,25	0,15	-	0,20	0,15	rest

Aluminium Alloy 2014 International Equivalences:

Europe	USA	Spain	France	Germany	G.B.	Italy	Sweden	Switzerland	Japan
E.N. 573	A.A.	U.N.E.	AFNOR	D.I.N.	B.S.	U.N.I.	S.I.S.	V.S.M.	J.I.S.
EN AW 2014	2014	38.313 L-3130	A-U4SG	ALCuSiMn 31255	H15	3581	9002/3	AlCu4SiMn	A 2014

Aluminium Alloy 2014 Mechanical properties Standard: EN 755-2 Alloy: EN AW-2014A [Al 99,5]:

Treatment state	Nominal thickness mm		Rm MPa		Rp0,2 MPa		Min. elongation %		Bending radius a)		Hardnes s HBS 1)
Treatment state	Greater than	up to	min.	max.	min.	max.	A50mm	A	180º	90º	Hardnes s HBS 1)
O	≥0,4	1,5	-	220	-	140	12	-	0,5t	0t	55
	1,5	3,0	-	220	-	140	13	-	1,0t	1,0t	55
	3,0	6,0		220		140	16			1,5 t	55
	6,0	9,0		220		140	16			2,5 t	55
	9,0	12,5		220		140	16			4,0 t	55
	12,5	25,0		220				10			55
T3	0,4	1,5	395		245		14				111
1,5	6,0	400		245		14				112
T4 T451	0,4	1,5	395		240		14		3,0 t	3,0 t	110
	1,5	6,0	395		240		14		5,0 t	5,0 t	110
	6,0	12,5	400		250		14			8,0 t	112
T451	12,5	40,0	400		250			10			112
40,0	100,0	395		250			7			111
T42	0,4	6,0	395		230		14				110
	6,0	12,5	400		235		14				111
	12,5	25,0	400		235			12			111
T6 T651	0,4	1,5	440		390		6			5,0 t	133
	1,5	6,0	440		390		7			7,0 t	133
	6,0	12,5	450		395		7			10 t	135
T651	12,5	40,0	460		400			6			138
	40,0	60,0	450		390			5			135
	60,0	80,0	435		380			4			131
	80,0	100,0	420		360			4			126
	100,0	120,0	410		350			4			123
T62	0,4	12,5	440		390		7				133
T62	12,5	25,0	450		395			6			135

Aluminium Alloy 2014 Mechanical properties Standard: EN 755-2 Alloy: EN AW-2014 [Al Cu4SiMg] :

Extruded Bar
Treatment state	Measurements mm		Rm Mpa		Rp0,2 MPa		A %	A50 mm %	Hardness HB
Treatment state	D1)	S2)	mín.	máx.	mín.	máx.	mín	mín.	Hardness HB
O, H111	≤ 200	≤ 200	–	250	–	135	12	10	55
O, H111	≤ 25	≤ 25	370	–	230	–	13	11	-
T4, T4510, T4511	25 < D ≤ 75	25 < S ≤ 75	410	–	270	–	12	–	110
	75 < D ≤ 150	75 < S ≤ 150	390	–	250	–	10	–	110
	150 < D ≤ 200	150 < S ≤ 200	350	–	230	–	8	–	110
T6, T6510, T6511	≤ 25	≤ 25	415	–	370	–	6	5	140
	25 < D ≤ 75	25 < S ≤ 75	460	–	415	–	7	–	140
	75 < D≤ 150	75 < S ≤ 150	465	–	420	–	7	–	140
	150 < D ≤ 200	150 < S ≤ 200	430	–	350	–	6	–	140
	200 < D ≤ 250	200 < S ≤ 250	420	–	320	–	5	–	140

1) D = Diameter of circular section bars.
2) S = Distance between faces for square-section and hexagonal bars, thickness for rectangular section bars.

Aluminium Alloy 2014 Physical Properties:

Modulus of elasticity N/mm2	Specific weight g/cm3	Melting temperature ºC	Linear expansion coefficient 1/106K	Thermal conductivity W/mK	Electrical resistivity at 20ºC - Ω cm	Electrical conductivity% IACS	Dissolution potential V
73.000	2,80	500-640	22,7	T4-134 T6-155	T4-5,1 T6-4,3	T4-34 T6-40	-0,78

Aluminium Alloy 2014 Technological Suitabilities:

Welding	Natural behaviour	Anodized	Mechanization State: T3 T3 T4 T6 T8
Under flame M	In a rural environment R	For protection R	Chip fragmentation B B
At the arc under argon gas M	In an industrial environment R	Decorative M	Surface gloss R R
Owing to electrical resistance MB	In a marine environment R	Hard anodized R
Brazed B	In sea water M

Thermal treatments	Products	Observations and applications
Forging temperature interval: 380º-460ºC. Total annealing: 420ºC with long-term cooling up to 250ºC. Annealing against acridity: 340ºC	Bars, profiles, tubes, sheets, plates.	The high mechanical characteristics of this alloy, particularly in a T6 state makes it very suitable for the aeronautical industry, structural elements and construction in general, iron fittings, screws, bolts etc.

Aluminium Alloy 2014 Charecteristics:

Cold Working	Aluminium / Aluminum 2014 alloy can be cold worked in the T4 and T3 tempers. Tight bend radii is not recommended for this alloy.
Welding	The inert gas consumable arc method is recommended for welding Aluminium / Aluminum 2014 alloy. Filler rods of either 2017 alloy or 2014 alloy are used in the welding process. Fixturing is arranged for minimum strength as this alloy is subject to cracking during the welding process.
Forging	Aluminium / Aluminum 2014 alloy can be forged between 399 and 454°C (750 and 850°F).
Forming	Conventional methods are used for forming Aluminium / Aluminum 2014 alloy. The forming process is performed in the T3 or T4 temper and tight bend radius is not recommended for this welding process.
Machinability	Aluminium / Aluminum 2014 alloy has good machinability in the annealed condition and usage of kerosene or oil is recommended for this machining process. Usage of 20° side rake, 10° clearance and 15° top rake is ess ential for lathe cutting.
Heat Treatment	Aluminium / Aluminum 2014 alloy is heat treated at 502°C (935°F) and then water quenched. T4 temper is produced as a result of this heat treatment.
Hot Working	Aluminium / Aluminum 2014 alloy is hot worked in temperatures ranging 149 and 204°C (300 to 400°F).
Hardening	Aluminium / Aluminum 2014 alloy is hardened by a precipitation heat treatment at 502°C (935°F). The alloy is then water quenched thus producing T4 temper. Additional cold work after the hardening process of this alloy produces other tempers. T6511 and T6510 tempers are produced by heat treatment at 160°C (320°F).
Applications	Aluminium / Aluminum 2014 alloy is used in the manufacture of truck frames and aircraft structures.

Countries we Export

Metal Ministry Inc Exports Commercially Pure Aluminium EN AW-2014A UNS A92014 to United States of America, Russia, United Kingdom, Kuwait, Qatar, Oman, UAE, Nigeria, Ethiopia, Egypt, Tanzania, Uganda, Algeria, Sudan, Morocco, Angola, Mozambique, Ghana, Cameroon, Cote D`lvoire, Niger, Burkina Faso, Mali, Malawi, Zambia, Senegal, Chad, Somalia, Zimbabwe, Guinea, Rwanda, Benin, Brundi, Tunisia, South Sudan, Togo, Sierra Leone, Libya, Congo, Liberia, Central African Republic, Mauritania, Eritrea, Namibia, Gambia, Botswana, Gabon, Lesotho, Guinea-Bissau, Mauritius, Eswatini, Djibouti, Comoros, Cabo Verde, Seychelles, Reunion, Western Sahara, Mayotte, Saint Helena, Afghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, Cyprus, East Timor, Georgia, Indonesia, Iran, Iraq, Israel, Japan, Kazakhstan, Jordan, Kyrgyzstan, Lebanon, Malaysia, Maldives, Mongolia, Myanmar, Nepal, North Korea, Palestine, Philippines, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Tajikistan, Thailand, Turkey, Taiwan, Uzbekistan, Vietnam, Yemen, Albania, Andorra, Austria, Belarus, Belgium, Bosnia & Herzegovina, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Lithuania, Moldova, Monaco, Montenegro, Norway, Netherlands, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Ukraine, Vatican City, Antigua & Barbuda, Anguilla, The Bahamas, Barbados, British Virgin Island, Canada, Cayman Island, Costa Rica, Cuba, Dominica, Greenland, Haiti, Jamaica, Martinique, Mexico, Navassa Island, Panama, Puerto Rico, Saint Lucia, Trinidad & Tobago, Argentina, Brazil, Bolivia, Chile, Ecuador, Colombia, Guyana, Paraguay, Peru, Uruguay, Venezuela, Australia, Fiji, Marshall Island, New Zealand, Papua New Guinea, Samoa, Solomon Islands & Tuvalu.

Cities we Supply

Metal Ministry Inc Supplies Commercially Pure Aluminium EN AW-2014A UNS A92014 products to Agartala, Agra, Agra Rampur, Ahmedabad, Aizawl, Ajmer, Aligarh, Allahabad, Alwar, Amaravati, Ambala, Ambattur, Ambernath, Amravati, Amritsar, Aurangabad, Bangalore, Bareilly, Belgaum, Bhagalpur, Bhavnagar, Bhilai, Bhiwandi, Bhopal, Bhubaneswar, Bidhannagar, Biharsharif, Bikaner, Bilaspur, Bokaro, Chandigarh, Chennai, Chittoor, Coimbatore, Cuttack, Dahod, Davanegere, Dehradun, Delhi, Dhanbad, Dharamsala, Dindigul, Diu, Durgapur, Erode, Faridabad, Fatehpur, Gandhidham, Gandhinagar, Ghaziabad, Greater Hyderabad, Greater Mumbai, Greater Warangal, Gurgaon, Guwahati, Gwalior, Haldia, Howrah, Hubballi-Dharwad, Hyderabad, Imphal, Indore, Jabalpur, Jaipur, Jalandhar, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kakinada, Kalyan-Dombivali, Kanpur, Karnal, Kavaratti, Kochi, Kohima , Kolhapur, Kolkata, Kota , Lucknow, Ludhiana, Madurai , Mehsana, Mangalore, Mangaluru, Mira-Bhayandar, Moradabad, Morbi, Mumbai, Muzaffarpur, Mysore, Nagpur, Namchi, Nasik, Navi Mumbai, NDMC, Nellore, New Delhi, New Town Kolkata, Noida, Oulgaret, Pali, Panaji, Panipat, Panvel, Pasighat, Patiala, Patna, Pimpri-Chinchwad, Port Blair, Puducherry, Pune, Raipur, Rajkot, Raipur, Raurkela Industrial Township, Rourkela, Sagar, Salem, Satna, Secunderabad, Shaharanpur, Shillong, Siliguri, Silvassa, Solapur, Srinagar, Surat, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirapalli, Tirunelveli, Tirupur, Tumkur, Udaipur, Ujjain, Ulhasnagar, Vadodara, Vapi, Varanasi, Vasai-Vasai-Virar, Vellore, Vishakhapatnam.

To buy online, Or get price of Commercially Pure Aluminium EN AW-2014A UNS A92014 send us an email on enquiry@metalministry.in or Call/WhatsApp on +91-9892171042 for quick quote & response. Aluminium EN AW-2014A UNS A92014 are supplied in Relevant standards as per customer requirements & Mill TC from Indian, USA, South African, Russian, German & European Mills only.