Aluminium alloy 2017 Chemical Physical Properties Data
Aluminium 2017 is stocked by Metal Ministry Inc. In Forms of Sheets, Plates, Coils, Bar Products, Pipes & Tubular Products, Flanges, Fittings & Custom Fabrication Parts as per Client Requirements all over the world. We Offer Cut to size to Full forms of Alloy 2017 Products.
Aluminium Alloy 2017 Chemical Composition:
| % | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Bi | Ti+Zr | Others | Al |
| Minimum | 0,20 | 3,50 | 0,40 | 0,40 | ||||||||
| Maximum | 0,80 | 0,70 | 4,50 | 1,00 | 1,00 | 0,10 | 0,25 | 0,25 | 0,15 | rest |
Aluminium Alloy 2017 International Equivalences:
| Europe | USA | Spain | France | Germany | G.B. | Italy | Sweden | Switzerland | Japan |
| E.N. 573 | A.A. | U.N.E. | AFNOR | D.I.N. | B.S. | U.N.I. | S.I.S. | V.S.M. | J.I.S. |
| EN AW 2017 | 2017 A | 38.312 L-3120 |
A-U4G | AlCuMg1 31325 |
H14 | 3579 9002/2 |
A2017 |
Aluminium Alloy 2017 Mechanical properties Standard: EN 755-2 Alloy: EN AW-2017A [Al 99,5]:
| Treatment state | Nominal thickness mm |
Rm MPa | Rp0,2 MPa | Min. elongation % | Bending radius a) | Hardnes s HBS 1) |
|||||
| Greater than | up to | min. | max. | min. | max. | A50mm | A | 180º | 90º | ||
| O | ≥ 0,4 | 1,5 | 225 | 145 | 12 | 0,5 t | 0 t | 55 | |||
| 3,0 | 1,5 | 225 | 145 | 14 | 1,0 t | 1,0 t | 55 | ||||
| 3,0 | 6,0 | 225 | 145 | 13 | 1,5 t | 55 | |||||
| 6,0 | 9,0 | 225 | 145 | 13 | 2,5 t | 55 | |||||
| 9,0 | 12,5 | 225 | 145 | 13 | 4,0 t | 55 | |||||
| 12,5 | 25,0 | 225 | 145 | 12 | 55 | ||||||
| T4 T451 | ≥0,4 | 1,5 | 390 | 245 | 14 | 3,0 t | 3,0 t | 110 | |||
| 1,5 | 6,0 | 390 | 245 | 15 | 5,0 t | 5,0 t | 110 | ||||
| 6,0 | 12,5 | 390 | 260 | 13 | 8,0 t | 111 | |||||
| T451 | 12,5 | 40,0 | 390 | 250 | 12 | 110 | |||||
| 40,0 | 100,0 | 385 | 240 | 10 | 108 | ||||||
| 100,0 | 120,0 | 370 | 240 | 8 | 105 | ||||||
| 120,0 | 150,0 | 350 | 240 | 4 | 101 | ||||||
| T42 | ≥0,4 | 3,0 | 390 | 235 | 14 | 109 | |||||
| 3,0 | 12,5 | 390 | 235 | 15 | 109 | ||||||
| 12,5 | 25,0 | 390 | 235 | 12 | 109 | ||||||
Aluminium Alloy 2017 Mechanical properties Standard: EN 755-2 Alloy: EN AW-2017 [Al Cu4SiMg] :
| Extruded Bar | |||||||||||
Treatment state |
Measurements mm | Rm MPa | Rp0,2 MPa | A % | A50 mm % | Hardness HBS | |||||
| D1) | S2) | min. | max. | min. | max. | min | min. | ||||
| O, H111 | ≤ 200 | ≤ 200 | – | 250 | – | 135 | 12 | 10 | 55 | ||
| T4, T4510, T45115) | ≤ 25 | ≤ 25 | 380 | – | 260 | – | 12 | 10 | 110 | ||
| 25 < D ≤ 75 | 25 < S ≤ 75 | 400 | – | 270 | – | 10 | – | 110 | |||
| 75 < D ≤ 150 | 75 < S ≤ 150 | 390 | – | 260 | – | 9 | – | 110 | |||
| 150 < D ≤ 200 | 150 < S ≤ 200 | 370 | – | 240 | – | 8 | – | 105 | |||
| 200 < D ≤ 250 | 200 < S ≤ 250 | 360 | – | 220 | – | 7 | – | 105 | |||
| Extruded Tube | |||||||||||
| Treatment state | Measurements mm e3) | Rm MPa | Rp0,2 MPa | A % | A50 mm % | ||||||
| min. | max. min. | max. | min | min. | |||||||
| O, H111 | ≤ 20 | – | 250 | – | 135 | 12 | 10 | ||||
| T4, T4510, T45115) | ≤ 10 | 380 | – 260 | – | 12 | 10 | |||||
| 10 < e ≤ 75 | 400 | – | 270 | – | 10 | 8 | |||||
| Extruded Profile | |||||||||||
| Treatment state | Measurements mm e3) | Rm MPa | Rp0,2 MPa | A % | A50 mm % | ||||||
| min. | max. | min. | max. | min | min. | ||||||
| T4, T4510, T45115) | £ 30 | 380 | – | 260 | – | 10 | 8 | ||||
Aluminium Alloy 2017 Physical Properties:
| Modulus of elasticity N/mm2 | Specific weight g/cm3 | Melting temperature ºC | Linear expansion coefficient 1/106K | Thermal conductivity W/mK | Electrical resistivity at 20ºC - Ω cm | Electrical conductivity% IACS | Dissolution potential V |
| 72.500 | 2,79 | 505-650 | 22,9 | 134 | 0-3,5 T4-5,1 |
T4-34 | -0,69 |
Aluminium Alloy 2017 Technological Suitabilities:
| Welding | Natural behaviour | Anodized | Mechanization State: T3 T3 T4 T6 T8 |
|---|---|---|---|
| Under flame B | In a rural environment R | For protection R | Chip fragmentation B |
| At the arc under argon gas M | In an industrial environment M | Decorative R | Surface gloss R B |
| Owing to electrical resistance MB | In a marine environment M | Hard anodized B | |
| Brazed M | In sea water M |
| Thermal treatments | Products | Observations and applications | |
| Forging temperature interval: 380º-460ºC. Total annealing: 420ºC with long-term cooling up to 250ºC. Annealing against acridity: 340ºC |
Bars, profiles, tubes, sheets, plates. | Average mechanical resistance and easy machining, suitable for mechanical applications, structural elements, boiler-making, rail braking, aviation, iron fittings, screws, bolts, ultralight elements, blow moulds and footwear, tempered state rivets before maturation, machinery. | |
Aluminium Alloy 2017 Charecteristics:
| Machinability and formability | Aluminium / aluminum 2017 alloy has excellent machinability in the T4 temper. It is recommended that oil lubricants be used for all machining operations. Likewise formability is excellent especially in the annealed condition. |
|---|---|
| Welding | Welding tends to reduce corrosion resistance, hence should be avoided whenever possible. If welding is required, heat treatment should be performed after welding to restore corrosion resistance. The preferable welding techniques are inert gas welding and resistance welding. |
| Annealing | Aluminium / aluminum 2017 alloy can be solution annealed at 504°C (940°F) for 3-4h followed by water quenching. Age hardening is performed at room temperature and this produces the T4 temper. Cold working such as shaping and bending, can be easily performed by using traditional methods. Annealing can be performed at 413°C (775°F) for 3 h and then controlled cooling at 10°C (50°F)/h down to 260°C (500° F). Finally it can be air cooled. |
| Aging | Aluminium / aluminum 2017 alloy ages normally at room temperature to produce optimum mechanical properties. Similarily, it is age hardenable at room temperature. |
| Applications | Aluminium / aluminum 2017 alloy is chiefly used in the following products:
|
Countries we Export
Metal Ministry Inc Exports Commercially Pure Aluminium EN AW-2017A UNS A92017 to United States of America, Russia, United Kingdom, Kuwait, Qatar, Oman, UAE, Nigeria, Ethiopia, Egypt, Tanzania, Uganda, Algeria, Sudan, Morocco, Angola, Mozambique, Ghana, Cameroon, Cote D`lvoire, Niger, Burkina Faso, Mali, Malawi, Zambia, Senegal, Chad, Somalia, Zimbabwe, Guinea, Rwanda, Benin, Brundi, Tunisia, South Sudan, Togo, Sierra Leone, Libya, Congo, Liberia, Central African Republic, Mauritania, Eritrea, Namibia, Gambia, Botswana, Gabon, Lesotho, Guinea-Bissau, Mauritius, Eswatini, Djibouti, Comoros, Cabo Verde, Seychelles, Reunion, Western Sahara, Mayotte, Saint Helena, Afghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, Cyprus, East Timor, Georgia, Indonesia, Iran, Iraq, Israel, Japan, Kazakhstan, Jordan, Kyrgyzstan, Lebanon, Malaysia, Maldives, Mongolia, Myanmar, Nepal, North Korea, Palestine, Philippines, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Tajikistan, Thailand, Turkey, Taiwan, Uzbekistan, Vietnam, Yemen, Albania, Andorra, Austria, Belarus, Belgium, Bosnia & Herzegovina, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Lithuania, Moldova, Monaco, Montenegro, Norway, Netherlands, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Ukraine, Vatican City, Antigua & Barbuda, Anguilla, The Bahamas, Barbados, British Virgin Island, Canada, Cayman Island, Costa Rica, Cuba, Dominica, Greenland, Haiti, Jamaica, Martinique, Mexico, Navassa Island, Panama, Puerto Rico, Saint Lucia, Trinidad & Tobago, Argentina, Brazil, Bolivia, Chile, Ecuador, Colombia, Guyana, Paraguay, Peru, Uruguay, Venezuela, Australia, Fiji, Marshall Island, New Zealand, Papua New Guinea, Samoa, Solomon Islands & Tuvalu.
CITIES WE SUPPLY:
Metal Ministry Inc Supplies Commercially Pure Aluminium EN AW-2017A UNS A92017 products to Agartala, Agra, Agra Rampur, Ahmedabad, Aizawl, Ajmer, Aligarh, Allahabad, Alwar, Amaravati, Ambala, Ambattur, Ambernath, Amravati, Amritsar, Aurangabad, Bangalore, Bareilly, Belgaum, Bhagalpur, Bhavnagar, Bhilai, Bhiwandi, Bhopal, Bhubaneswar, Bidhannagar, Biharsharif, Bikaner, Bilaspur, Bokaro, Chandigarh, Chennai, Chittoor, Coimbatore, Cuttack, Dahod, Davanegere, Dehradun, Delhi, Dhanbad, Dharamsala, Dindigul, Diu, Durgapur, Erode, Faridabad, Fatehpur, Gandhidham, Gandhinagar, Ghaziabad, Greater Hyderabad, Greater Mumbai, Greater Warangal, Gurgaon, Guwahati, Gwalior, Haldia, Howrah, Hubballi-Dharwad, Hyderabad, Imphal, Indore, Jabalpur, Jaipur, Jalandhar, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kakinada, Kalyan-Dombivali, Kanpur, Karnal, Kavaratti, Kochi, Kohima , Kolhapur, Kolkata, Kota , Lucknow, Ludhiana, Madurai , Mehsana, Mangalore, Mangaluru, Mira-Bhayandar, Moradabad, Morbi, Mumbai, Muzaffarpur, Mysore, Nagpur, Namchi, Nasik, Navi Mumbai, NDMC, Nellore, New Delhi, New Town Kolkata, Noida, Oulgaret, Pali, Panaji, Panipat, Panvel, Pasighat, Patiala, Patna, Pimpri-Chinchwad, Port Blair, Puducherry, Pune, Raipur, Rajkot, Raipur, Raurkela Industrial Township, Rourkela, Sagar, Salem, Satna, Secunderabad, Shaharanpur, Shillong, Siliguri, Silvassa, Solapur, Srinagar, Surat, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirapalli, Tirunelveli, Tirupur, Tumkur, Udaipur, Ujjain, Ulhasnagar, Vadodara, Vapi, Varanasi, Vasai-Vasai-Virar, Vellore, Vishakhapatnam.
To buy online, Or get price of Commercially Pure Aluminium EN AW-2017A UNS A92017 send us an email on enquiry@metalministry.in or Call/WhatsApp on +91-9892171042 for quick quote & response. Aluminium EN AW-2017A UNS A92017 are supplied in Relevant standards as per customer requirements & Mill TC from Indian, USA, South African, Russian, German & European Mills only.
